arXiv_RO
-
Accuracy Evaluation of INS/ZUPT Filtering Methods Based on Different Geometric Error Definitions
Abstract
Geometric filters have recently been introduced to improve the accuracy and consistency of inertial-based integrated navigation systems. Error states were defined through specific group operations, introducing state correlations in error definition, which were lacked in the additive error used by a conventional indirect Kalman filter. The desirable consistent filtering models can be obtained based on specific geometric errors. For zero-velocity measurements expressed in the reference frame, this paper derives left-error process and measurement models from invariant filtering, two-frame-group filtering, and equivariant filtering. Importantly, a new group operation is introduced for the left tangent-group equivariant error. The analysis shows that the two-frame-group invariant extended Kalman filter (TFG-IEKF) and the tangent-group equivariant filter (TG-EqF) do not offer a significant consistency advantage over the invariant extended Kalman filter (IEKF). Experiments with an INS/ZUPT measurement system show that, under small initial attitude errors, the conventional indirect extended Kalman filter (EKF) achieves loop-closure position errors below $0.1\%$ of the traveled distance, while the three geometric filters achieve comparable positioning accuracy.
Abstract (translated)
URL
https://arxiv.org/abs/2609.31057
PDF
-
Kintsugi-VLA: Turning Failed Robot Rollouts into Recovery Data through Interventional Recoverability
2026-09-25 09:42:20Ivan Snegirev, Elizaveta Semenyakina, Dmitrii Maliukov, Miguel Altamirano Cabrera, Dzmitry TsetserukouAbstract
Simulation enables scalable training of Vision-Language-Action policies by using privileged experts to generate visual demonstrations without requiring every trajectory to be collected through manual teleoperation. However, such pipelines typically retain successful demonstrations while failed rollouts are discarded, even though they expose precisely the off-nominal states from which recovery must be learned. We introduce Kintsugi-VLA, a framework for converting failed rollouts into targeted synthetic recovery data by exploiting exact state restoration and branching in simulation. For a fixed privileged expert, we define interventional recoverability as the probability of completing the original task after the simulator is restored to a given state, estimate it using adaptive Monte Carlo continuations with pointwise Wilson intervals, and characterize its non-monotonic evolution along failed trajectories. These estimates identify an observed terminal low-recoverability frontier-the point after which measured recoverability remains below a threshold-which is then used to select informative recovery starting states. In a simulated Franka manipulation task, targeted recovery data yield aggregate SmolVLA recovery success of 34.6\% and 38.4\% under difficulty- and frame-budget matching, respectively, 5.8 and 6.7 percentage points above uniform sampling within the same recovery window. The same ordering is observed under disturbed end-to-end execution and shifted clutter and physics conditions, while clean-task success decreases from 76.8\% to 74.7\%. Kintsugi-VLA demonstrates how failed simulator rollouts can be transformed from discarded experience into structured recovery-training data through direct interventional measurement.
Abstract (translated)
URL
https://arxiv.org/abs/2609.31048
PDF
-
Compact Force Sensor for Dual-UAV Cable-Suspended Payload Transport with Tension-Aware Outer-Loop Control
2026-09-25 09:28:16Andrea Delbene, Giorgio Cannata, Giorgio Carlini, Filippo Sante, Marco BagliettoAbstract
Cooperative payload transportation using multiple \textit{Unmanned Aerial Vehicles} (UAVs) poses challenges in stability, coordination, and robustness, especially under external disturbances and unmodeled dynamics. This work proposes a dual-UAV payload transportation framework supported by a compact, custom-designed force sensor measuring the interaction force at the UAV cable anchor point. The sensor design and mathematical model are presented, and its performance is characterized through static and dynamic tests evaluating linearity, hysteresis, repeatability, and crossload. The control architecture follows a cascade structure: fast inner loops handle vehicle stabilization, while outer loops are designed to compensate for the measured forces. The approach is validated through simulations and indoor experiments under position uncertainty. Payload-drop and constrained-space tests assess the proposed sensing and control architecture against literature-based distributed references, showing improved stabilization, coordination, and disturbance rejection. A video of the experiments is available at: this https URL.
Abstract (translated)
URL
https://arxiv.org/abs/2609.31035
PDF
-
Precision at Speed: Sample-Efficient Online Model-Based Reinforcement Learning for Hydraulic Excavator Control
2026-09-25 09:22:12Claudio Canales, Fang Nan, Marco Hutter, Javier Ruiz-del-SolarAbstract
Precise, high-speed control remains challenging for robots with complex actuation dynamics. Learning directly on hardware is further constrained by the cost of real-world interaction. We present an online model-based reinforcement learning framework that learns a probabilistic dynamics ensemble model from scratch for sampling-based model predictive control. A precision-gated contouring objective conditions the progress reward on path accuracy, prioritizing precision over speed. In a data-driven excavator simulator, the framework achieves higher sample efficiency than the evaluated model-based reinforcement learning baselines. We validate the framework by learning directly on an 11.5-ton Menzi Muck M445 hydraulic excavator, without demonstrations or simulation pretraining. After 20 minutes of interaction, the controller reaches tracking accuracy comparable to prior learned controllers trained on 100-150 minutes of data. After 40 minutes, it sustains sub-centimeter mean path error at high operating speeds.
Abstract (translated)
URL
https://arxiv.org/abs/2609.31025
PDF
-
Co-design of trajectory and morphology for a vertical jump-climbing robot
Abstract
Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.
Abstract (translated)
URL
https://arxiv.org/abs/2609.31014
PDF
-
Quadruped Obstacle Avoidance and Footstep Planning with Distributed Low-cost Time-of-Flight Sensors
2026-09-25 08:52:16Giammarco Caroleo, Timoth\'ee Mahamoodally, Matteo Manzardo, Jin Jin, Marco Pontin, Matias Mattamala, Renato Vidoni, Perla Maiolino, Maurice FallonAbstract
Quadruped robots typically rely on depth cameras and LiDAR sensors to map their local environment. However, these sensors have limited close-range coverage, are relatively expensive, and consume significant power. This study investigates whether distributed Time-of-Flight (ToF) sensors can serve as a low-cost alternative to depth cameras for near-field terrain mapping for locomotion and local navigation. We designed a distributed ToF sensing architecture for the ANYbotics ANYmal quadruped, assessed its environment reconstruction accuracy, and benchmarked it against depth cameras for terrain mapping and obstacle avoidance. Distributing these sensors around the robot can also avoid the blind spots of traditional sensors. Our results show that, despite their low resolution and higher measurement noise, distributed ToF sensors can support reliable perceptual locomotion with centimeter-level local mapping accuracy. The proposed sensing strategy provides sufficient geometric information for near-field obstacle avoidance and footstep planning, at substantially lower cost, energy consumption, and system complexity than depth cameras.
Abstract (translated)
URL
https://arxiv.org/abs/2609.31008
PDF
-
TACTIC: Understanding Tactile Encoders and Conditioning for Contact-rich Robot Manipulation Policies
2026-09-25 08:17:23Seongjin Bien, D\'ebora Oliveira Makowski, Carlo Kneissl, Reihaneh Mirjalili, Pankhuri Vanjani, Rudolf Lioutikov, Gitta Kutyniok, Florian Walter, Wolfram BurgardAbstract
Tactile information is essential for contact-rich manipulation tasks in robotics. Vision-based tactile sensors make it particularly easy to design end-to-end manipulation policies with tactile sensing, as they enable the use of existing encoders from computer vision. However, this has led to a huge variety of architectures, training datasets, and evaluation protocols, making it difficult to determine which design choices best encode touch. In this work, we address this gap and present a comprehensive study of tactile encoders and fusion strategies across various contact-rich manipulation tasks in real-world experiments. To enable a controlled comparison, we train and evaluate all models under the same pipeline and experimental setup, comprising more than 2000 real-world rollouts. Our results go beyond other studies that only compare simulation performance, which does not necessarily translate to real-world settings, where large-scale evaluations are needed to obtain reliable statistics. Our key finding is that there is no universally optimal representation or fusion strategy for encoding visual-tactile. Instead, the best encoder backbone and fusion scheme depend strongly on the task.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30969
PDF
-
FRAM: Trajectory-Guided Visual Feature Selection for Compact Language-Conditioned Robot Manipulation
2026-09-25 08:16:16Hiroshi Ito, Hyogo Hiruma, Yoshiki Kanai, Takahiro Yoshida, Akira Kanazawa, Hiroki YamadaAbstract
Vision-Language-Action models achieve strong performance in robot manipulation, but often require large numbers of parameters. In this work, we propose the Future Representation Action Model (FRAM), a small policy that explicitly links the future end-effector trajectory to the current visual input. FRAM uses the image coordinates of the predicted trajectory as spatial pointers and reads local visual features related to the motion from the current image. This organizes the information for action generation into the reference position (Where), the visual state (What), and the future motion (Future). Trajectory labels are generated automatically from demonstrations and camera geometry, so no manual annotation is needed. With 138.7M parameters, including a frozen language encoder, FRAM reaches an average success rate of 92.2% over the four standard LIBERO suites, close to the 94.2% of $\pi_0$ with 3.3B parameters. Without extra training, it also reaches an average of 67.3% on LIBERO-Plus. Ablations confirm that both the future trajectory and the local visual features improve performance and robustness. On a real dual-arm UR5e, FRAM stacks cups using only wrist cameras, including choosing and switching between the left and right arms. These results show that selecting visual information based on future motion is an effective way to obtain both high performance and robustness in a small robot policy.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30965
PDF
-
VisTacAlign: Co-Training Dexterous Policies on Tactile Human and Robot Demonstrations
2026-09-25 08:12:04Julien Poffet, Matthew Strong, Ankush Dhawan, Baiyu Shi, Shalika Neelaveni, Yujia Yuan, Zhenan Bao, Monroe Kennedy IIIAbstract
Human demonstrations are a cheap source of data for dexterous manipulation, but co-training a robot policy on them requires closing the human--robot gap in every modality the policy consumes. We present VisTacAlign, a framework for co-training 3D-visual-tactile dexterous policies on human and robot demonstrations. Glove-tracked human hand motion is retargeted to a 17-DoF tactile robot hand with a one-time fingertip correction. The human hand is then erased from both stereo views and replaced by a posed robot-hand mesh painted with pixels from robot recordings, and a real-time stereo foundation model is re-run on the composite, so the human point clouds carry the same stereo errors and visibility as the robot ones. Finally, a capacitive tactile glove is aligned to the robot's fingertip sensors in its signal space, giving one interpretable per-finger force representation. A diffusion transformer consumes point-cloud, proprioceptive, and per-finger tactile tokens. On three real-world tasks requiring precise force -- Lego assembly, plucking strawberries of varying size, and activating and lifting a power drill -- adding aligned human demonstrations to existing robot data improves over robot-only policies, and ablations show that both tactile input and visual alignment are necessary. Project page: this https URL
Abstract (translated)
URL
https://arxiv.org/abs/2609.30959
PDF
-
Bundled Contact Gradients: Stabilizing Differentiable Simulation for Deployable Dynamic Tasks
2026-09-25 08:02:29Dyuman Aditya, Jin Cheng, Clemens Schwarke, Quan Nguyen, Gaurav Sukhatme, Stelian Coros, Gabriele FadiniAbstract
Differentiable simulation provides analytic gradients of robot dynamics, enabling fast and sample-efficient first-order policy optimization. However, obtaining smooth and informative gradients through rigid-body contact typically requires softened contact models, often at the expense of physical fidelity and thereby limiting learned policies largely to simulation. This trade-off becomes particularly consequential for dynamic humanoid motions, where accurate contact dynamics are critical for transferring policies to the real world. Increasing contact stiffness in rigid-body simulation improves the fidelity of interactions, but also makes the dynamics increasingly sensitive to small state perturbations, producing high-variance gradients that can destabilize first-order policy learning. To address this, we propose \emph{Bundled Contact Gradients (BCG)}, a contact-local randomized smoothing framework for differentiable policy learning. When stiff contact is detected, our method evaluates a local bundle of randomized perturbation rollouts around the stiff contact configuration and aggregates their gradient signal thereby reducing gradient variance. We demonstrate the effectiveness of our method by successfully training and transferring dynamic motions zero-shot onto a real-world Unitree G1 humanoid platform. Videos and supplementary information can be found at this https URL
Abstract (translated)
URL
https://arxiv.org/abs/2609.30951
PDF
-
Cloak: Zero-Shot Cross-Embodiment Manipulation by Masking the End-Effector from the VLA
2026-09-25 07:48:37Michael Piseno, Guy Tevet, C. Karen LiuAbstract
We present Cloak, a training recipe that endows a Vision-Language-Action (VLA) model with zero-shot cross-embodiment transfer by cloaking the end-effector from its own wrist camera. The end-effector occupies a large and consistent region of the wrist view and masking it allows for embodiment-agnostic visual reasoning. Cloak renders a mask in simulation from the robot's known geometry, accurately and in real time, with no segmentation or generative models. During training, we augment the mask so the model generalizes to embodiments unseen at training time. We demonstrate the recipe with Cloak-VLA, a VLA trained with Cloak on a single parallel-jaw gripper dataset. No data of new embodiments is ever collected. Cloak-VLA transfers zero-shot to various unseen embodiments, including another gripper, another arm, and a five-fingered hand, while preserving the source embodiment's performance. By decoupling the wrist view from its own embodiment, Cloak allows data to outlive the hardware it was collected on.
Abstract (translated)
URL
https://arxiv.org/abs/2606.22836
PDF
-
Causeway: Restoring Task Accessibility for Instruction Switching in VLA Policies
2026-09-25 07:25:19Qingzi Wang, Kaixi Feng, Guangyao Shi, Xiyang Wu, Ang Li, Dinesh ManochaAbstract
Vision-language-action (VLA) policies can execute many tasks from standard initial states, yet a new instruction may fail after another task has altered the robot's physical state. We study instruction switching, where a new task is issued during or after the execution of a different one. We observe that a target task that is reliably completed from its standard initial states can become inaccessible from states produced by a preceding task. We call such states task islands. We propose Causeway, a training-free inference-time intervention. Given the current state and a re-entry pose for the target task, Causeway back-propagates through the frozen decoding computation and applies a state-directed write within the action-stream representation. The VLA decodes the return motion itself, without parameter updates, a new action head, or external action generation. Across 71 cross-object pairs, three switch timings, and three VLA architectures on LIBERO-Goal, Causeway raises bare-switch success from 3-26% to 47-65% and increases the rate of reaching the handoff neighborhood by 42-72 percentage points across models. Additional experiments on LIBERO-Object and a real xArm platform show that the recovery extends beyond the main LIBERO-Goal setting, both in simulation and on a robot.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30913
PDF
-
PHASE: Compliance-Enabled Tactile Phase Retrieval for Few-Shot Insertion Learning
2026-09-25 06:53:56Jeremy Siburian, Cristian C. Beltran-Hernandez, Tatsuya Matsushima, Yusuke Iwasawa, Masashi Hamaya, Mai NishimuraAbstract
Contact-rich assembly tasks such as peg-in-hole insertion remain difficult to learn from limited demonstrations. While retrieval-augmented imitation learning, which augments target demonstrations with relevant prior data, offers a promising direction, its applicability to contact-rich manipulation remains largely unexplored. Contact-rich insertion unfolds over multiple phases from search to insert, and retrieving phase-specific experience from prior data in principled ways remains an open question. Our key insight is that a compliant wrist enables the robot to sustain contact throughout execution, producing rich tactile and force signals that naturally reveal the phase structure of insertion and inform what should be retrieved. Based on this insight, we present PHASE (PHase-Aware Segmentation and REtrieval), a framework for compliance-enabled tactile phase retrieval that integrates multimodal contact-aware representation learning, variable-length phase segmentation from tactile signals, and phase-consistent retrieval for policy learning. We evaluate PHASE on real-world peg-in-hole insertion across five peg geometries, comparing against retrieval strategies drawn from state-of-the-art methods under a shared policy architecture. PHASE improves the overall success rate by 13 percentage points over the strongest non-phase-aware baseline, and improves performance under unseen initial positions by 30 percentage points. These results demonstrate that aligning retrieval with interaction-defined contact phases substantially improves robustness in few-shot insertion learning.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30889
PDF
-
A Second Torque Port for Series Elastic Actuators: Parallel-Integrated Design and Time-Scale Torque Allocation
2026-09-25 06:30:31Donghao Jia, Xiubo Xia, Junhang Liu, Zeyu Zhu, Xiaoyu Geng, Jian SunAbstract
A series elastic actuator has a single torque port and pays for it twice: the geared motor must swing its own reflected inertia through the spring, so the amplitude it delivers collapses as $\omega^{-2}$ in the command frequency $\omega$ once it saturates, while commands below the transmission's breakaway friction never arrive at all. This letter opens a second torque port on the load side, placing a frameless direct-drive micro motor in parallel with a fixed-stiffness spring -- a parallel-integrated SEA, or Pi-SEA, whose delivered torque is read from spring deflection and micro current without a sensor -- and dividing the commanded torque between the two channels by time scale rather than by filter design. The micro torque loop is the fast subsystem, which makes the closed loop singularly perturbed and turns the separation the channels need into a bound to check rather than a crossover to tune; a leaky mid-ranging integrator returns the steady load to the spring; and the amplitude ceiling, read backwards, becomes a closed-form sizing rule that matches spring, geared motor and micro motor to the amplitudes and frequencies an application asks for. Against SEAs, the Pi-SEA widens the tracked band at small amplitudes and lowers the residual the joint imposes on its environment, each by an order of magnitude.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30873
PDF
-
VLaRL: Augmenting Vision-Language-Action Models with Simulation-Trained Latent-Conditioned Residual RL
2026-09-25 06:18:40Namiko Saito, Kinam Kim, Heecheol Kim, Katsushi Ikeuchi, Yasuyuki MatsushitaAbstract
Vision-language-action (VLA) models provide broad, instruction-conditioned manipulation behaviors, but their physical execution can remain imprecise during contact-rich interaction. Residual reinforcement learning (RL) can correct such errors while keeping the VLA frozen, but real-robot RL is costly and safety-critical. We propose VLA Latent-Conditioned RL (VLaRL), which enables residual RL for frozen VLAs to be trained in simulation and deployed on real robots without real-world RL or online adaptation. The key challenge is transferring the learned residual policy despite the visual gap between simulation and reality. Rather than requiring pixel-level visual correspondence, VLaRL uses the VLA's internal vision-language latent representation to condition residual control and as the sim-to-real transfer interface, and learns a lightweight mapper that transforms simulation-derived latents toward the real latent distribution. Across four contact-rich manipulation tasks and two VLA backbones, VLaRL improves real-world success in all task-backbone combinations, while controlled ablations demonstrate the importance of both latent conditioning and latent alignment for transferring simulation-trained residual control.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30868
PDF
-
Impedance Cloning: Learning Equilibrium Point Parameters for Contact-Rich Manipulation
2026-09-25 05:36:42Hayato Takahashi, Ryoga Oishi, Yuki Kasuga, Toshiaki TsujiAbstract
Contact-rich manipulation requires robots to regulate force against surfaces whose geometry deviates unpredictably from training conditions. Trajectory-based imitation learning, which reproduces observable outputs, breaks down under such shifts. We propose Impedance Cloning, which instead imitates the biomechanical priors that generate motion -- the stiffness and equilibrium point -- and thereby passively absorbs contact uncertainty. Because these parameters encode intent rather than outcome, they generalize across surface geometries where trajectory reproduction does not. We extract them from bilateral teleoperation demonstrations via a particle filter without force/torque sensors and evaluate the framework on two CRANE-X7 manipulators. In a wiping task with joint-space actions, the trajectory-based baseline loses contact below -6 cm, whereas the proposed method maintains a consistent 4-5 N contact force above -6 cm, with a gradual decrease below; with Cartesian-space actions, its force-height slope over 0 to +8 cm is 0.13 +/- 0.03 N/cm, versus 0.34-0.83 N/cm for fixed-impedance baselines. In a pick-and-place task with 10 diverse cups (100 trials), the proposed method succeeds in 84 trials, outperforming the fixed-impedance baseline (74/100) and performing comparably to a variable impedance control baseline (82/100) with one demonstration instead of ten. In a grasping task, the representation reduces torque tracking error with both ILBiT and Mamba backbones, confirming its generality across architectures.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30842
PDF
-
Fast Plans, Faithful Actions: Closing the Planning-Execution Gap in Hierarchical Vision-Language-Action Models
2026-09-25 05:22:23Chuanliang Xie, Boyu Ma, Gen Li, Yizhou Liu, Houwang Chen, Xinyu Zhou, Jianfei YangAbstract
Hierarchical vision-language-action (VLA) systems consist of a high-level vision-language planner and a low-level action expert that generates continuous actions. This hierarchical design has practical value only if the planner can generate plans fast enough to meet real-time control requirements, and the resulting plans actually contribute to the generation of action. We study one such system, a waypoint hierarchy pipeline adapted from $\pi_{0.5}$, and find that neither requirement is satisfied. This baseline relies on token-level autoregressive decoding (Token-AR) to generate a waypoint plan, requiring 57 very expensive vision-language model (VLM) forward passes. However, we find that erasing the waypoint endpoints has little effect on task success. Two findings reveal the misalignment of planner-executor: the planner generates outputs at an excessively fine granularity, and the executor underuses plans as a control condition. We address the latency issue with waypoint-aligned block-autoregressive decoding (Block-AR), and plan underuse issue with normalized goal modulation (NGM), a layer-wise goal path constrained by phase gating and anti-shortcut training so that the waypoint influences action generation maintaining other signals. Our method reduces the maximum number of VLM forward passes from 57 to 8 on LIBERO, including one prefix prefill, and achieves an $8.7\times$ reduction in planning latency on a Rokae dual-arm robot. With normalized goal modulation and anti-shortcut training, Block-AR's success rate on LIBERO-Long increases from 91.0% to 96.2%, while its average success rate across the four suites increases from 95.85% to 98.45%. On three bimanual tasks with this robot, success rates remain comparable across methods.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30833
PDF
-
HIRE: History-Conditioned Interaction Reasoning and High-Rate Execution for Visually Aliased Precision Manipulation
2026-09-25 05:13:23Rongji Li, Wenhao He, Cewu Lu, Xingyu Chen, Xu-Yao ZhangAbstract
Precision manipulation with contact-critical interactions is often history-dependent: visually similar observations can correspond to different latent interaction states and therefore require different actions, while small execution errors can alter task outcomes. Policies relying on the current visual observation alone cannot resolve such ambiguity; force-aware and memory-augmented methods enrich physical or temporal context, while reactive high-rate policies improve local contact response, yet long-horizon temporal reasoning and precision execution remain largely decoupled in existing methods, limiting reliable progression in visually aliased precision manipulation. To bridge this gap, we introduce History-Conditioned Interaction Reasoning and Execution (HIRE), a cross-rate framework comprising a history-conditioned Interaction-State Reasoner (ISR) and a high-rate Interaction-Manifold Executor (IME). ISR encodes ordered wrench history with a temporal wrench encoder and Force Perceiver as persistent physical evidence for state-consistent action generation, while IME structures contact-critical motion into intrinsic progress and transverse correction for precise execution; their cross-rate loop allows the resulting physical traces to inform subsequent reasoning. In real-robot experiments across surface, insertion, and rotational interactions, HIRE achieves at least 90% completion across all evaluated task stages while improving interaction-state disambiguation, execution precision, and generalization. More broadly, HIRE provides a unified reasoning--execution perspective on precision manipulation under history-dependent partial observability, where physical interaction both realizes task intent and reveals latent-state evidence for future decisions. Code will be released upon publication.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30828
PDF
-
SeA-RVINS: Semantic-Aware Tightly Coupled RTK-Visual-Inertial System with Correlation-Preserving Robust Estimation for Urban Navigation
Abstract
Reliable absolute pose estimation in urban environments is undermined by outlier measurements and incorrect temporal associations that can persist in tightly coupled estimators. Global Navigation Satellite System (GNSS) observations provide globally referenced measurements but are prone to multipath effects. Visual-inertial sensing supplies local motion constraints, but false visual associations can corrupt the estimator. We present SeA-RVINS, a fixed-lag factor-graph Real-Time Kinematic (RTK) visual-inertial system for robust urban pose estimation. A semantic-aware learned stereo frontend rejects unreliable tracks before persistent landmarks enter the graph. For double-differenced GNSS measurements, SeA-RVINS applies Dynamic Covariance Scaling through configurable batch, scalar, and latent-pivot robust formulations while retaining the shared-pivot correlation structure. We propose a hybrid ambiguity-continuation strategy that shares one ambiguity state over short arcs with verified continuity and softly links successive arcs through random-walk factors. On an approximately 20-km route from the public TEX-CUP dataset, including about 50\% deep-urban driving, the latent-pivot configuration achieves 100\% availability and a 1.6-m maximum horizontal error, with 96.16\% and 99.90\% of epochs below 1.0 and 1.5 m, respectively. The implementation is released as open-source software
Abstract (translated)
URL
https://arxiv.org/abs/2609.30814
PDF
-
Moving Horizon Estimation for Quadrotors: An $mathcal{L}_1$ Adaptive Optimizer Approach
2026-09-25 04:01:22Thinh Nguyen, Minkyung Kim, Sandeep Banik, Jinrae Kim, Naira HovakimyanAbstract
Moving Horizon Estimation (MHE) is a state estimation method based on finite-horizon optimization that can offer higher accuracy at the cost of increased computation compared to Kalman filter-based approaches. We present a linear smoothing MHE formulation as a dense Quadratic Program (QP), and a solver consisting of a continuous-time Newton's method augmented with the $\mathcal{L}_1$ Adaptive Optimizer ($\mathcal{L}_1$-AO). While MHE is inherently time-varying, conventional approaches treat it as a sequence of independent, time-invariant problems and employ iterative solvers at each time step, which can be both inaccurate and computationally burdensome. In contrast, time-varying solvers track the optimal solution with fewer iterations by exploiting the temporal evolution of the problem, thereby reducing the computational load. In this research, we enhance both the performance and efficiency of MHE through a time-varying solver with an $\mathcal{L}_1$-AO augmentation that compensates for the prediction inaccuracy, which is common in practice due to noisy sensors and the lack of prior knowledge of the system. Simulation results on a quadrotor platform show that the $\mathcal{L}_1$-AO-augmented approach solves the MHE optimization problem more efficiently than the baseline time-invariant solver and achieves higher estimation accuracy under challenging conditions, compared with both the Extended Kalman Filter and the standard MHE.
Abstract (translated)
URL
https://arxiv.org/abs/2609.30777
PDF
